Set up the Admin Workstation¶
Earlier, you should have created the Admin Workstation Tails USB along with a persistent volume for it. Now, we are going to add a couple more features to the Admin Workstation to facilitate SecureDrop’s setup.
If you have not switched to and booted the Admin Workstation Tails USB on your regular workstation, do so now.
Start Tails with Persistence Enabled¶
After you boot the Admin Workstation Tails USB on your normal workstation, you should see a “Welcome to Tails” screen with a field labeled “Encrypted Persistent Storage”. Enter your password and click Unlock. Do not click Start Tails yet. Under “Additional Settings” click +.
Click Administration password, enter a password for use with this specific Tails session, and click Add.
The Tails administration password is a one-time password. It will reset every time you shut down Tails.
During the installation, you will need the unsafe browser to access the firewall configuration. To enable it, click “Unsafe Browser” and click Add:
Click Start Tails. After Tails finishes booting, make sure you’re connected to the Internet and that the Tor status onion icon is not crossed out , consulting the icons in the upper right corner of the screen.
Download the SecureDrop repository¶
The rest of the SecureDrop-specific configuration is assisted by files stored in the SecureDrop Git repository. We’re going to be using this again once SecureDrop is installed, but you should download it now. To get started, open a terminal . You will use this Terminal throughout the rest of the install process.
Start by running the following commands to download the git repository.
cd ~/Persistent git clone https://github.com/freedomofpress/securedrop.git
Since the repository is fairly large and Tor can be slow, this may take a few minutes.
Do not download SecureDrop Git repository as a Zip file, or any other means. Only download by using the given git command.
Verify the Release Tag¶
It is crucial for the integrity of your installation that you carefully follow the instructions below. By following these steps, you will verify if your copy of the codebase has been approved by the SecureDrop development team.
Download and verify the SecureDrop Release Signing Key using the following command:
gpg --keyserver hkps://keys.openpgp.org --recv-key \ "2359 E653 8C06 13E6 5295 5E6C 188E DD3B 7B22 E6A3"
If you are not copy-pasting this command, we recommend you double-check you have entered it correctly before pressing enter. GPG will implicitly verify that the fingerprint of the key received matches the argument passed.
If GPG warns you that the fingerprint of the key received does not match the one requested, do not proceed with the installation. If this happens, please contact us at email@example.com.
--recv-key command fails, first double-check that
Tails is connected to Tor. Once you’ve confirmed that you’re successfully
connected to Tor, try re-running the
--recv-key command a few times.
If the command still fails, the keys.openpgp.org keyserver may be down. In that case, we recommend downloading the key from the SecureDrop website:
cd ~/Persistent torify curl -LO https://securedrop.org/securedrop-release-key.asc
Before importing it, inspect the key’s fingerprint using the following
--dry-run option ensures that the key is not imported just
gpg --with-fingerprint --import-options import-show --dry-run \ --import securedrop-release-key.asc
Compare the fingerprint in the output with the fingerprint at the beginning of this section. If the fingerprints match, you can safely import the key, using the following command:
gpg --import securedrop-release-key.asc
If you encounter any difficulties verifying the integrity of the release key, do not proceed with the installation. Instead, please contact us at firstname.lastname@example.org.
Once you have imported the release key, verify that the current release tag was signed with the release signing key:
cd ~/Persistent/securedrop/ git fetch --tags git tag -v 2.0.2
The output should include the following two lines:
gpg: using RSA key 2359E6538C0613E652955E6C188EDD3B7B22E6A3 gpg: Good signature from "SecureDrop Release Signing Key <email@example.com>" [unknown]
If you do not see the message above, signature verification has failed and you should not proceed with the installation. If this happens, please contact us at firstname.lastname@example.org.
Verify that each character of the fingerprint matches what is on the screen of your workstation. If it does, you can check out the new release:
git checkout 2.0.2
Create the Admin Passphrase Database¶
We provide a KeePassXC password database template to make it easier for admins and journalists to generate strong, unique passphrases and store them securely. Once you have set up Tails with persistence and have cloned the repo, you can set up your personal password database using this template.
Earlier versions of Tails used KeePassX instead of KeePassXC. The provided template is compatible with both.
You can find the template in
in the SecureDrop repository that you just cloned. To use the template:
Copy the template to the Persistent folder - from a terminal, run the command:
cp ~/Persistent/securedrop/tails_files/securedrop-keepassx.kdbx \ ~/Persistent/Passwords.kdbx
Open the KeePassXC program which is already installed on Tails
Select Database ▸ Open database, and navigate to the location of ~/Persistent/Passwords.kdbx, select it, and click Open
Leave the password blank and click OK. If you receive an “Unlock failed” prompt, click Retry with empty password.
Edit entries as required.
Select Database ▸ Save Database to save your changes.
The next time you use KeepassXC, the database at
will be selected by default.
KeePassXC will show a warning every time you attempt to open a database without entering a password. Because your persistent volume is encrypted, setting up this additional password is not strictly required. It provides some additional protection, e.g., if a computer is left running, at the cost of convenience.
For passwordless access without warnings, you can protect the database using a key file, via Database ▸ Database settings ▸ Security ▸ Add additional protection ▸ Add Key File ▸ Generate. This key file has to be stored in your Persistent folder and it must be selected when you open the database.
After configuring the password database, restart KeePassXC once to verify that you are able to access it as expected.
You will not be able to access your passwords if you forget the master password or the location of the key file used to protect the database.
In case you wish to manually create a database, the suggested password fields in the template are:
- Admin account username
- App Server SSH Onion URL
- Email account for sending OSSEC alerts
- Monitor Server SSH Onion URL
- Network Firewall Admin Credentials
- OSSEC Alert Public Key
- SecureDrop Login Credentials
- Auth Value: Journalist Interface
- Onion URL: Journalist Interface
- Personal GPG Key
- SecureDrop Login Credentials
Secure Viewing Station:
- SecureDrop GPG Key
- This section contains clones of the above entries in case a user accidentally overwrites an entry.