Virtual Environments: Servers

SecureDrop is a multi-server system, and you may need the full server stack available in order to develop and test some features. To make this easier, the project includes a Vagrantfile that can be used to create two predefined virtual environments:

This document explains the purpose of, and how to get started working with, each one.

Note

If you plan to alter the configuration of any of these machines, make sure to review the Testing: Configuration Tests documentation.

Staging

A compromise between the development and production environments. This configuration can be thought of as identical to the production environment, with a few exceptions:

  • The Debian packages are built from your local copy of the code, instead of installing the current stable release packages from https://apt.freedom.press.

  • The staging environment is configured for direct SSH access so it’s more ergonomic for developers to interact with the system during debugging.

  • The Postfix service is disabled, so OSSEC alerts will not be sent via email.

This is a convenient environment to test how changes work across the full stack.

You should first bring up the VM required for building the app code Debian packages on the staging machines:

make build-debs
make staging
molecule login -s libvirt-staging-focal -h app-staging
sudo -u www-data bash
cd /var/www/securedrop
./manage.py add-admin

To rebuild the local packages for the app code and update the staging VMs:

make build-debs
make staging

The Debian packages will be rebuilt from the current state of your local git repository and then installed on the staging servers.

The web interfaces and SSH are available over Tor. A copy of the Onion URLs for Source and Journalist Interfaces, as well as SSH access, are written to the Vagrant host’s install_files/ansible-base directory.

To access the Source Interface from Tor Browser, use the v3 onion URL from the file install_files/ansible-base/app-sourcev3-ths.

To use the Journalist Interface, you will need to modify Tor Browser’s configuration to allow access to an authenticated onion service:

  • First, add the following line to your Tor Browser’s torrc file, typically found at tor-browser_en-US/Browser/TorBrowser/Data/Tor/torrc:

    ClientOnionAuthDir TorBrowser/Data/Tor/onion_auth
    
  • Next, create the onion_auth directory:

    mkdir tor-browser_en-US/Browser/TorBrowser/Data/Tor/onion_auth
    chmod 0700 tor-browser_en-US/Browser/TorBrowser/Data/Tor/onion_auth
    
  • Finally, copy the file install_files/ansible-base/app-journalist.auth_private to the onion_auth directory and restart Tor Browser. You should now be able to visit the v3 onion address in app-journalist.auth_private from Tor Browser.

For working on OSSEC monitoring rules with most system hardening active, update the OSSEC-related configuration in install_files/ansible-base/staging.yml so you receive the OSSEC alert emails.

Direct SSH access is available for staging hosts, so you can use molecule login -s <scenario> -h app-staging, where <scenario> is either libvirt-staging-focal or qubes-staging-focal, depending on your environment.

By default, the staging environments are created with an empty submissions database. If you want to set up a staging environment with a preexisting submissions database, you can do so using a SecureDrop backup file as follows:

  • Create a directory install_files/ansible-base/test-data.

  • Copy the backup file to the directory above.

  • Define an environmental variable TEST_DATA_FILE whose value is the name of the backup file - for example sd-backup.tar.gz - and run make staging:

    TEST_DATA_FILE="sd-backup.tar.gz" make staging
    

A staging environment will be created using the submissions and account data from the backup, but ignoring the backup file’s Tor configuration data.

Note

It is not recommended to use backup data from a live SecureDrop installation in staging, as the backup may contain sensitive information and the staging environment should not be considered secure.

When finished with the Staging environment, run molecule destroy -s <scenario> to clean up the VMs. If the host machine has been rebooted since the Staging environment was created, Molecule will fail to find the VM info, as it’s stored in /tmp. If you use libvirt, run virt-manager and destroy the staging VMs manually, by right-clicking on the entries and choosing Destroy.

Production

This is a production installation with all of the system hardening active, but virtualized, rather than running on hardware. You will need to use a virtualized Admin Workstation in order to provision these machines.

Switching to the Vagrant libvirt provider

Make sure you’ve already installed Vagrant, as described in the multi-machine setup docs.

Ubuntu 20.04 setup

Install libvirt and QEMU:

sudo apt-get update
sudo apt-get install libvirt-bin libvirt-dev qemu-utils qemu virt-manager
sudo /etc/init.d/libvirt-bin restart

Add your user to the libvirtd group:

sudo addgroup libvirtd
sudo usermod -a -g libvirtd $USER

Install the required Vagrant plugins for converting and using libvirt boxes:

vagrant plugin install vagrant-libvirt
vagrant plugin install vagrant-mutate

Note

If Vagrant is already installed it may not recognize libvirt as a valid provider. In this case, remove Vagrant with sudo apt-get remove vagrant and reinstall it.

Log out, then log in again. Verify that libvirt is installed and KVM is available:

libvirtd --version
kvm-ok

Debian stable setup

Install Vagrant, libvirt, QEMU, and their dependencies:

sudo apt-get update
sudo apt-get install -y vagrant vagrant-libvirt libvirt-daemon-system qemu-kvm virt-manager
sudo apt-get install -y ansible rsync
vagrant plugin install vagrant-libvirt
vagrant plugin install vagrant-mutate
sudo usermod -a -G libvirt $USER
sudo systemctl restart libvirtd

Add your user to the kvm group to give it permission to run KVM:

sudo usermod -a -G kvm $USER
sudo rmmod kvm_intel
sudo rmmod kvm
sudo modprobe kvm
sudo modprobe kvm_intel

Log out, then log in again. Verify that libvirt is installed and your system supports KVM:

sudo libvirtd --version
[ `egrep -c 'flags\s*:.*(vmx|svm)' /proc/cpuinfo` -gt 0 ] &&  \
echo "KVM supported!" || echo "KVM not supported..."

Set libvirt as the default provider

Set the default Vagrant provider to libvirt:

echo 'export VAGRANT_DEFAULT_PROVIDER=libvirt' >> ~/.bashrc
export VAGRANT_DEFAULT_PROVIDER=libvirt

Convert Vagrant boxes to libvirt

Convert the VirtualBox images for Focal from virtualbox to libvirt format:

vagrant box add --provider virtualbox bento/ubuntu-20.04
vagrant mutate bento/ubuntu-20.04 libvirt

You can now use the libvirt-backed VM images to develop against the SecureDrop multi-machine environment.

Install from an Admin Workstation VM

In SecureDrop, admin tasks are performed from a Tails Admin Workstation. You should configure a Tails VM in order to install the SecureDrop production VMs by following the instructions in the Virtualizing Tails guide.

Once you’re prepared the Admin Workstation, you can start each VM:

molecule create -s libvirt-prod-focal

At this point you should be able to SSH into both app-prod and mon-prod with the user vagrant and the password vagrant.

From here you can follow the :server configuration instructions to test connectivity and prepare the servers.

These instructions will have you generate SSH keys and use ssh-copy-id to transfer the key onto the servers. By default, the Vagrant boxes authorize a publicly provided SSH keypair, which you can download on Tails and import via ssh-add instead of generating a new SSH keypair.

Note

If you have trouble SSHing to the servers from Ansible, remember to remove any old ATHS files in install_files/ansible-base.

Now from your Admin Workstation, set up the administration environment with:

cd ~/Persistent/securedrop
./securedrop-admin setup

If you want to enable HTTPS for the source interface, you can generate a test CA cert, server key, and server cert using the following commands:

sudo apt-get install make
make self-signed-https-certs

This will generate the files securedrop_source_onion.ca, securedrop_source_onion.crt, and securedrop_source_onion.key in the install_files/ansible-base directory, ready for use in the next step.

Important

The self-signed certificates should not be used in a live instance. They are provided for development and testing purposes only.

To proceed with a full install, you will need, at a minimum:

  • The IP addresses of the two virtualized servers, app-prod and mon-prod. You can obtain them via virsh domifaddr libvirt-prod-focal_app-prod and virsh domifaddr libvirt-prod-focal_mon-prod.

  • The username and sudo password (both default to vagrant for both servers)

  • A Submission Public Key. securedrop-admin will reject the key included with the development environment. For testing purposes only, you can create a new keypair within the Tails VM.

  • An OSSEC Alert Public Key. We recommend using your own public key if you intend to test OSSEC email functionality.

Configure and install SecureDrop on the server VMs using the commands:

./securedrop-admin sdconfig
./securedrop-admin install

After the installation is complete, you can configure your Admin Workstation to SSH into each VM via:

./securedrop-admin tailsconfig

securedrop-admin will write the SecureDrop configuration to ~/Persistent/securedrop/install_files/ansible-base/group_vars/all/site-specific. To simplify subsequent installs, you may wish to make a copy of this file, as well as the two required public keys, in a directory in ~/Persistent or outside the Tails VM.